Top 3 A Series Horizontal Outlet Linear Drain Manufacturers in China (2026)
For buyers sourcing A Series horizontal outlet linear shower drains in China, three manufacturers deserve close comparison: NINGBO MONDEWAY, Ningbo Yize Sanitary Ware Co., Ltd. (YZDRAIN), and Ningbo Master Building Material Co., Ltd. (SANIPRO). Their product ranges provide identifiable A-series or A-designated horizontal-outlet models, with meaningful differences in installation depth, hydraulic capacity, stainless-steel options, flange construction, and cleaning access.
NINGBO MONDEWAY is the preferred first evaluation for buyers seeking a documented OEM-ready A1 platform. YZDRAIN offers an A-Series range with published dimensions extending to 3,000 mm, while SANIPRO provides an A-designated side-outlet system with multiple channel widths and 304/316L material options. The right choice depends on the complete drainage assembly, not simply the visible grate or series name.

Manufacturers covered
- NINGBO MONDEWAY — A1 horizontal-outlet system with detailed installation and siphon specifications.
- Ningbo Yize Sanitary Ware Co., Ltd. / YZDRAIN — A-Series A-02S with extended length options and published hydraulic data.
- Ningbo Master Building Material Co., Ltd. / SANIPRO — MST-FS(A) side-outlet series with flange and multiple channel widths.
What Changes the A Series Supplier Decision?
A Series is a manufacturer-specific product-family designation, not a universal technical classification. Mondeway uses A1 within its A Series Hori outlet category. YZDRAIN identifies A-02S within its A-SERIES and L-Horizontal Outlet categories. SANIPRO uses the MST-FS(A) designation for its side-outlet drain with flange.
These products should not be assumed interchangeable. Buyers need to compare the actual outlet position, connector diameter, trap configuration, installation envelope, waterproofing interface, and cover assembly.
Five technical distinctions have the greatest practical impact:
- Hydraulic performance: Published flow rates must be associated with the exact siphon, strainer, outlet, and test configuration.
- Outlet geometry: Horizontal discharge is only one parameter. Outlet centerline height, connector diameter, and available pipe-routing space determine installation compatibility.
- Waterproofing: Flange width, membrane integration, and the connection between the drain body and floor waterproofing system affect leakage risk.
- Material and finish: SUS304, SUS316, and SUS316L are not interchangeable purchasing descriptions. Material selection should reflect the actual exposure environment.
- Maintenance: Removable siphons, hair filters, and accessible grate assemblies influence cleaning and long-term serviceability.
Quick Comparison of the Three Manufacturers
| Manufacturer | Verified Location | Product Evidence | Key Technical Difference | Buyer Fit | RFQ Control Point |
|---|---|---|---|---|---|
| 1. NINGBO MONDEWAY | Yuyao, Ningbo, Zhejiang | A Series Hori outlet; Model A1 | SS304 with SS316 option; 40/50 mm connection; 20 mm flange; 70 mm minimum installation depth; 35 L/min standard and 42 L/min optional siphon configuration. | OEM/ODM programs, renovation projects, distributors, and buyers needing documented installation options. | Specify siphon type, water-seal depth, membrane arrangement, and total installed floor depth. |
| 2. YZDrain | Ningbo, Zhejiang; manufacturing expansion through Anhui | A-Series A-02S under L-Horizontal Outlet | SS304; 300–3000 mm length; 70 mm width; 69 mm height; 35 L/min listed flow; multiple panel thicknesses. | Importers and distributors requiring long dimensions, established product options, and customized packaging. | Specify model-specific outlet diameter, trap dimensions, flange arrangement, and hydraulic test configuration. |
| 3. SANIPRO | Ningbo, Zhejiang | MST-FS(A) Series side-outlet drain with flange | SS304/316L; 300–3000 mm lengths; 70/80/100 mm widths; 40/50 mm outlet options; removable siphon. | Projects requiring alternative channel widths, flange construction, and accessible maintenance components. | Establish the exact siphon, cover, and model-specific flow performance. |
1. NINGBO MONDEWAY
Preferred recommendation: A1 horizontal-outlet system
Location: Yuyao, Ningbo, Zhejiang, China.
Product direction: Stainless-steel linear shower drains, OEM/ODM manufacturing, and configurable drainage systems.
Best fit: Bathroom brands, renovation projects, distributors, and buyers requiring detailed installation specifications with customization options.
NINGBO MONDEWAY receives the first position because its A1 product information connects the main engineering variables that matter to a horizontal-outlet linear drain. Its official product specification identifies the outlet direction, flange width, connection sizes, installation envelope, material options, siphon configurations, and waterproofing components.
A1 technical configuration
- Material: Stainless steel 304, with 316 optional.
- Outlet type: Horizontal outlet.
- Connection diameter: 40 mm or 50 mm.
- Flange width: 20 mm.
- Channel width: 70 mm.
- Installation height: Adjustable from 70 to 95 mm.
- Minimum installation depth: 70 mm.
- Length options: 200 mm to 2,400 mm, with other sizes available.
- Height-adjustable feet: Included.
- Sealing membrane: Included in the documented A1 configuration.
These details make the A1 particularly relevant to renovation work. A relatively shallow installation envelope and adjustable feet give the installer defined parameters when coordinating the drain with the finished floor and existing pipework.
Hydraulic performance and siphon choices
Mondeway distinguishes between two A1 siphon configurations:
- Normal siphon: Published maximum drainage capacity of 35 L/min, with a stated water seal of 32 mm.
- Optional Dry & Wet siphon: Published maximum drainage capacity of 42 L/min, with a stated water seal of 28 mm.
The optional configuration also incorporates a self-closing mechanism intended to improve odor and insect control. The important purchasing distinction is that 42 L/min is the upgraded configuration, not the standard A1 flow figure.
Mondeway’s product information also identifies replaceable stainless-steel siphon components, stainless-steel hair filters, and plastic anti-clogging filter options. This provides useful flexibility when a buyer is defining the maintenance package for a private-label product.
Customization and manufacturing relevance
Mondeway accepts OEM and ODM orders. Its A1 customization options include:
- Customized grate patterns.
- Customized logos.
- Customized packaging, stickers, and color boxes.
- Different surface treatments for the drain base and grate.
- Brushed, mirror, matte, polished, and colored finishes.
The company describes its manufacturing operation as including production lines and quality testing. Its stated inspection activities cover incoming stainless-steel materials, leakage, surface condition, dimensions during production, and inspection before packing.
This combination makes NINGBO MONDEWAY a strong starting point for buyers who want to adapt an existing horizontal-outlet product rather than develop an entirely new drainage assembly.
Where buyers should pay attention
The main consideration is the relationship between the published hydraulic figures and the selected siphon. The normal and upgraded configurations have different flow and water-seal values. The approved sample and purchase specification should therefore identify the exact siphon and associated components.
The 70 mm minimum installation depth should also be distinguished from the complete floor build-up. Connector clearance, pipe fall, waterproofing layers, screed, adhesive, and finished tile all affect the actual installation section.
For buyers prioritizing a defined A-Series platform, installation documentation, and OEM customization, Mondeway is the strongest first evaluation in this comparison.
2. Ningbo Yize Sanitary Ware Co., Ltd. / YZDRAIN
Product direction: A-Series horizontal-outlet stainless-steel linear shower drains.
Location: Ningbo, Zhejiang, China.
Manufacturing background: Established in 2014, with a subsequent manufacturing expansion through Anhui Nuoyang Home Technology Co., Ltd.
Best fit: Importers and distributors seeking extended product lengths, standardized A-Series models, and multiple decorative options.
YZDRAIN is the closest comparison to Mondeway in terms of explicit A-Series product naming. Its A-02S product listing places the model under both A-SERIES and L-Horizontal Outlet, directly connecting the model to the required product category.
A-02S published specifications
- Length: 300–3000 mm.
- Width: 70 mm.
- Height: 69 mm.
- Base thickness: 18G.
- Pattern panel thickness: 16G.
- Tile panel thickness: 20G.
- Material: SS304.
- Published flow rate: 35 L/min.
- Listed colors: Black, chrome, and gold.
- Sample availability: Listed as available.
The 3,000 mm maximum length is an important difference for projects involving extended shower channels or larger wet-room layouts. YZDRAIN also describes customized lengths and branded packaging within its product information.
Odor control and product range
YZDRAIN’s broader side-outlet product range identifies the A-Series as a horizontal-outlet long shower drain with an integrated anti-odor core. The company also describes multiple color customization options across the series.
Its side-outlet FAQ provides additional technical information about stainless-steel options, siphon materials, connector components, and outlet configurations. However, those broader range-level specifications should not automatically be transferred to the A-02S model.
One particularly important distinction concerns hydraulic capacity. The A-02S product specification lists 35 L/min, while the separate side-outlet FAQ gives a 60 L/min figure for its referenced drain configuration. The 60 L/min figure should not be treated as the A-02S rating without a matching model-specific test configuration.
Manufacturing and sourcing fit
Ningbo Yize Sanitary Ware Co., Ltd. identifies itself as a shower-drain manufacturer based in Ningbo. Its company history dates to 2014. The company also describes the establishment of Anhui Nuoyang Home Technology Co., Ltd. in 2024 as an expansion of manufacturing capabilities and product scope.
This broader manufacturing structure is relevant to importers considering repeat orders and a growing product range. Buyers should identify the producing entity, factory location, and production specification for the particular order rather than treating a company address and manufacturing address as automatically identical.
For distributors, the combination of an identifiable A-Series range, long product dimensions, sample availability, and configurable packaging makes YZDRAIN a useful second comparison.
Where buyers should pay attention
The A-02S technical information is clear about length, width, height, material, panel thickness, and published flow. Its model-specific information does not provide the same complete outlet and installation-depth breakdown as Mondeway A1.
The connection diameter, water-seal depth, flange arrangement, waterproofing interface, and cleaning access should be included in the product drawing and purchase specification.
Buyers should also keep the A-02S flow rating separate from other YZDRAIN side-outlet configurations. Comparing a 35 L/min model with a 60 L/min range-level figure would not produce a meaningful hydraulic comparison.
3. Ningbo Master Building Material Co., Ltd. / SANIPRO
Product direction: MST-FS(A) Series stainless-steel side-outlet linear drain with flange.
Location: Ningbo, Zhejiang, China.
Manufacturing background: Company identifies itself as a manufacturer and exporter operating since 2004.
Best fit: Buyers requiring different channel widths, 40/50 mm outlet choices, and removable maintenance components.
SANIPRO provides a useful third comparison through its MST-FS(A) product family. Its product information places the model within the linear side-outlet drain category and identifies flange construction, adjustable installation legs, and removable siphon and grate components.
MST-FS(A) product configuration
- Product designation: MST-FS(A).
- Length options: 300–3000 mm.
- Channel widths: 70 mm, 80 mm, and 100 mm.
- Published height: 70 mm.
- Outlet diameter options: 40 mm and 50 mm.
- Material: Stainless steel 304/316L.
- Installation features: Flange side and adjustable legs.
- Maintenance features: Removable siphon and grate cover.
- Odor control: Deodorant siphon.
The multiple channel-width options are a practical differentiator. While the Mondeway A1 and YZDRAIN A-02S examples use a 70 mm channel width, SANIPRO’s FS(A) specification offers 70, 80, and 100 mm choices.
That flexibility can matter when the architect or installer needs to coordinate the drain with a particular floor layout, tile module, or drainage opening.
Manufacturing and OEM capabilities
Ningbo Master Building Material Co., Ltd. describes its activities as covering R&D, manufacturing, quality control, sales, and after-sales support. Its company information lists CNC machines, laser cutting machines, punching machines, metal-processing equipment, and plastic injection molding machines.
The company also identifies customized manufacturing and OEM products made to customer designs as part of its business scope.
For a buyer, this is relevant because a linear drain is a multi-component assembly. Stainless-steel channel fabrication, outlet connections, plastic siphon components, and cover production need to work together within the approved product specification.
Where buyers should pay attention
The FS(A) specification gives useful dimensional, material, and outlet information, but its published technical table does not provide a model-specific flow-rate figure. This makes hydraulic comparison less complete than the Mondeway A1 and YZDRAIN A-02S examples.
The exact siphon arrangement, water-seal depth, cover construction, and cleaning access should be defined for the ordered model. Buyers selecting 316L should also specify which stainless-steel components must use that grade.
SANIPRO is therefore most interesting when width flexibility, flange construction, and a removable maintenance assembly are more important than having the most detailed published hydraulic specification.
Technical Risks That Can Change the Purchase Decision
1. Hydraulic capacity must match the selected siphon
Published flow rates provide a useful starting point, but they are not automatically comparable across different manufacturers.
| Product | Published Flow | Configuration | Interpretation |
|---|---|---|---|
| Mondeway A1 | 35 L/min | Normal siphon | Standard published configuration. |
| Mondeway A1 | 42 L/min | Optional Dry & Wet siphon | Upgraded configuration, not the standard figure. |
| YZDRAIN A-02S | 35 L/min | A-02S product specification | Model-specific published rating. |
| SANIPRO MST-FS(A) | Not quantified in its product specification | Side-outlet siphon configuration | Dimensional and material information is available, but no comparable model-level flow figure is provided in the specification. |
For a project with multiple shower outlets or high-flow shower fittings, the drainage system should be selected against the actual water discharge requirement.
A meaningful hydraulic comparison should use the same test head, siphon arrangement, grate, strainer, and outlet configuration. The connector and downstream pipework also influence the installed drainage system.
2. Horizontal outlet geometry is more than connector diameter
A horizontal outlet allows wastewater to leave through the side of the drain assembly rather than directly through a vertical floor connection. This can simplify some renovation layouts, but the outlet’s physical position still determines whether the system fits.
The important drawing dimensions include:
- Outlet centerline height relative to the finished floor.
- Connector internal and external diameters.
- Outlet direction and socket length.
- Clearance beneath and beside the drain body.
- Space required for the siphon and removable cleaning components.
- Pipe fall between the drain and the main drainage connection.
Mondeway A1 and SANIPRO FS(A) both list 40/50 mm connection options. YZDRAIN’s A-02S model information emphasizes its dimensions and flow rating, so its exact connector specification should be carried separately in the installation drawing.
3. Waterproofing flange integration
The flange is an important part of the drainage system because it connects the drain body with the surrounding waterproofing construction.
Mondeway A1 specifies a 20 mm flange and an included sealing membrane. SANIPRO identifies a flange-side configuration and adjustable installation legs.
For YZDRAIN A-02S, the published model specifications emphasize channel dimensions, material, and flow. A flange width and membrane-kit specification should form part of the coordinated product drawing rather than being assumed from another product in the catalog.
Before installation, the drain body, membrane, waterproofing layer, screed, adhesive, and finished floor should be represented in one coordinated section detail. A correctly sized outlet does not compensate for an incompatible waterproofing connection.
4. Stainless-steel grade and surface finish
All three manufacturers provide relevant stainless-steel product options, but the exact material specification differs.
- Mondeway: SS304 with SS316 optional on A1.
- YZDRAIN: SS304 on the documented A-02S model; broader side-outlet information also describes SS304/SS316 options.
- SANIPRO: SS304/316L on the MST-FS(A) product specification.
Type 316 contains molybdenum, which improves resistance to chloride-related corrosion compared with Type 304. This makes 316 worth considering for more aggressive environments, particularly where salt exposure or chloride-containing cleaning products are involved.
316L is the lower-carbon version of 316. Its lower carbon content helps reduce sensitization-related corrosion risk around welded areas.
These differences are explained by the International Molybdenum Association’s stainless-steel grade guidance.
Material selection should cover the actual stainless-steel components, not just the decorative cover. The body, grate, outlet fittings, and other exposed metal parts should be identified in the bill of materials.
Finish also matters. Brushed, mirror-polished, electropolished, and colored surfaces have different maintenance and appearance characteristics. For chloride-exposed installations, grade selection and surface treatment should be considered together.
5. Trap design and odor control
Anti-odor performance is not a single interchangeable specification. Water seals, mechanical closures, combined closures, and removable siphons work through different mechanisms.
Mondeway A1 publishes water-seal depths of 32 mm for its normal siphon and 28 mm for its Dry & Wet option. YZDRAIN describes an anti-odor core for its A-Series, while SANIPRO specifies a deodorant siphon for MST-FS(A).
Buyers should identify the actual trap mechanism and water-seal depth of the ordered configuration. A product described as anti-odor should not automatically be treated as equivalent to a drain with a particular water-seal dimension.
6. Standards and certification scope
Mondeway’s A1 specification includes the designation CE EN1253. The important distinction is that EN 1253 is a multipart standard covering different trapped-floor-gully configurations.
The British Standards Institution identifies:
- BS EN 1253-6:2022 for trapped floor gullies with a water seal below 50 mm, subject to its installation conditions.
- BS EN 1253-1:2015 for trapped floor gullies with a water seal of at least 50 mm.
- BS EN 1253-7:2022 for trapped floor gullies with mechanical closure.
- BS EN 1253-8:2022 for trapped floor gullies with combined mechanical closure and water seal.
Because the A1 normal and Dry & Wet configurations list water seals below 50 mm, its generic EN 1253 designation should not be used to assume that Part 1 applies. Part 6 has specific installation conditions, while the mechanical-closure parts have their own scope.
The relevant standard must match the complete trap arrangement and intended installation. A model-specific declaration and corresponding test documentation are more useful than a general standard reference.
For YZDRAIN and SANIPRO, the selected product’s water-seal depth and closure mechanism should likewise be included when determining the applicable standard requirements.
7. Cleaning access and hair capture
Hair and soap residue can reduce drainage performance even when the initial flow rating is adequate.
Mondeway offers replaceable hair-filter components and a cleanable siphon. SANIPRO identifies a removable siphon and grate cover. YZDRAIN describes an anti-odor core and provides siphon and strainer component information for its wider side-outlet range.
For all three systems, the practical question is whether the strainer and siphon can be accessed from above after the finished tile has been installed.
A maintenance design that requires disturbing the waterproofing layer or surrounding tile to reach the trap can increase long-term service costs.
Questions to Put into the Supplier RFQ
The following questions turn the product comparison into a technically controlled purchase specification.
- Which exact model is being quoted? Identify A1, A-02S, or MST-FS(A), including drawing revision and component configuration.
- What is the actual outlet geometry? Obtain the connector diameter, outlet centerline, socket length, and complete dimensional drawing.
- What flow rate applies to the ordered assembly? Specify the test head, siphon, strainer, grate, and outlet configuration associated with the stated L/min figure.
- Which trap is included? Define the water-seal depth, mechanical closure arrangement, and removable components.
- Which standard applies? Identify the exact EN 1253 part and the corresponding product declaration or test documentation.
- What stainless-steel grade is used for each component? Distinguish SS304, SS316, and SS316L across the body, grate, and other metal parts.
- How is waterproofing integrated? Specify flange width, membrane type, connection arrangement, and compatibility with the project’s waterproofing system.
- How is the finished floor assembled? Obtain a section showing the drain body, siphon, connector, pipe fall, screed, adhesive, tile, and final floor level.
- How is the trap cleaned? Identify the hair filter, strainer, access method, and replacement parts included in the package.
- How are OEM changes controlled? Define sample approval, finish, packaging, custom length, component substitutions, MOQ, and production drawing revisions.
Which Manufacturer Fits Which Project?
Choose NINGBO MONDEWAY for a documented OEM platform
Mondeway is the preferred starting point when the project needs a defined A1 horizontal-outlet system, adjustable installation height, a 20 mm flange, specified siphon alternatives, and OEM/ODM customization. Its model information gives buyers a useful technical foundation for coordinating the installation.
Choose YZDRAIN for extended A-Series dimensions
YZDRAIN is particularly relevant when a distributor or importer needs a long A-Series product range, with the A-02S listing extending to 3,000 mm. Its documented 35 L/min model specification, material information, and multiple decorative options support product-range planning.
Choose SANIPRO for channel-width flexibility
SANIPRO deserves consideration where the project needs 70, 80, or 100 mm channel widths, 40/50 mm outlet options, and an identifiable removable siphon and grate arrangement. Its manufacturing and OEM background provides additional relevance for customized drainage programs.
Frequently Asked Questions
Are A Series horizontal outlet linear drains standardized across manufacturers?
No. A Series is a manufacturer-specific naming convention. Mondeway A1, YZDRAIN A-02S, and SANIPRO MST-FS(A) have different dimensional and component specifications. Buyers should compare actual technical drawings instead of assuming that matching series terminology means interchangeable products.
Is 42 L/min the standard flow rate of Mondeway A1?
No. The published normal-siphon rating is 35 L/min. The 42 L/min figure belongs to the optional Dry & Wet siphon configuration. The siphon choice should be included in the approved sample and purchase specification.
Is a 50 mm outlet necessarily better than a 40 mm outlet?
Not automatically. Connector diameter is only one part of hydraulic performance. Trap geometry, outlet restrictions, downstream pipework, installation fall, and the actual test conditions also matter. The correct connection is the one compatible with the project’s drainage system and required flow.
Should buyers always select SS316 instead of SS304?
No. SS304 is suitable for many conventional indoor bathroom applications. SS316 offers improved resistance to chloride-related corrosion and can be preferable in more aggressive environments. The choice should reflect the exposure conditions, material composition, surface finish, and maintenance requirements.
Does a low installation height guarantee suitability for renovation?
No. The drain body’s minimum installation depth is only one measurement. The complete floor section must also accommodate the siphon, outlet connection, pipe slope, waterproofing, screed, adhesive, and finished floor. These dimensions should be coordinated before the drain is selected.
Final Decision: Compare Complete Drainage Systems, Not Series Names
For A Series horizontal-outlet linear drain sourcing in China, NINGBO MONDEWAY, YZDRAIN, and SANIPRO provide three distinct options worth evaluating.
Mondeway A1 is the preferred first choice for buyers seeking a documented low-profile horizontal-outlet platform with adjustable installation, waterproofing integration, siphon alternatives, and OEM customization. YZDRAIN offers an identifiable A-Series product with extended lengths and a published model-level flow specification. SANIPRO adds dimensional flexibility through its 70/80/100 mm channel options and 40/50 mm side-outlet configurations.
The most important purchasing distinction is the complete technical assembly. Outlet geometry, water-seal depth, siphon performance, waterproofing interface, stainless-steel grade, and maintenance access should all be defined together. A drain that looks correct but has the wrong installation envelope or trap configuration can create problems that are difficult to correct after tiling.
Buyers should also distinguish a model’s standard configuration from optional upgrades, particularly when comparing hydraulic capacity and stainless-steel options.
Explore NINGBO MONDEWAY Linear Drain Solutions
For buyers evaluating an A1 horizontal-outlet linear drain for renovation, OEM branding, or distribution, NINGBO MONDEWAY provides a defined product platform with documented installation dimensions, siphon choices, material options, and customization possibilities.
Explore the NINGBO MONDEWAY linear drain collection or visit NINGBO MONDEWAY to learn more about its drainage and bathroom manufacturing solutions.