Top 5 China-Based Linear Drain Suppliers for Italy Bathroom Projects (2026)

Top 5 China-Based Linear Drain Suppliers for Italy Bathroom Projects (2026)

For Italian bathroom projects, choosing a Chinese linear drain supplier requires more than comparing stainless steel grades and decorative grate patterns. The critical differences are installation depth, water-seal configuration, outlet geometry, drainage capacity and the connection between the drain flange and the tiled-floor waterproofing system. Five manufacturers offer particularly useful product-level specifications for this decision: NINGBO MONDEWAY, Ningbo Bojin, Yuhuan Better Machinery, Ningbo FIT and Ningbo Comfort. NINGBO MONDEWAY is the primary recommendation for buyers considering low-build-up shower renovations, while the other manufacturers provide distinct alternatives for tile-insert designs, vertical connections, hydraulic capacity and conventional 50 mm outlets.

NINGBO MONDEWAY

The most important Italy-specific consideration is the relationship between the shower drain’s water seal and the applicable European drainage requirements. A low-profile product with a water seal below 50 mm cannot automatically be treated as interchangeable with a conventional trapped floor gully. The building configuration, branch ventilation, available floor depth and connection arrangement can change which model is appropriate.

The following comparison prioritizes identifiable linear-drain models, published technical dimensions, material options, hydraulic figures and installation interfaces. It distinguishes manufacturer-declared product specifications from the requirements governing an Italian bathroom installation.

Quick shortlist: five manufacturers to evaluate

  1. NINGBO MONDEWAY — Low-profile horizontal linear drains, adjustable installation height and integrated waterproofing components.
  2. Ningbo Bojin Sanitaryware Technology Co., Ltd. — Tile-insert drains, extended custom lengths and 40–50 mm connection accessories.
  3. Yuhuan Better Machinery Co., Ltd. — Stainless steel 304/316 drains with vertical outlets and a published 40 L/min capacity.
  4. Ningbo Fit Sanitary Ware Co., Ltd. — Straight-outlet linear drains with 304/316L material options and specified material thicknesses.
  5. Ningbo Comfort — Conventional stainless steel linear drains with 50 mm outlets and multiple standard lengths.

Comparison table: technical specifications and Italian project fit

Rank and manufacturer China location Product evidence Installation and drainage characteristics Italian project suitability
1. NINGBO MONDEWAY Yuyao, Ningbo, Zhejiang A1 linear shower drain; stainless steel 304, optional 316 70 mm minimum installation depth; 32 mm normal water seal; 40/50 mm connection; 35 L/min normal siphon capacity Low-build-up renovations, horizontal connections and integrated membrane interfaces
2. Ningbo Bojin Ningbo, Zhejiang BJ-LSF-TPG01 tile-insert linear drain; 304/316 stainless steel 30 L/min; 40 mm outlet with 40–50 mm adapter; 20 mm flange; lengths up to 2,500 mm Tile-insert installations, custom channel lengths and concealed floor finishes
3. Yuhuan Better Machinery Yuhuan, Zhejiang BG85 and BS85 stainless steel linear drains; 304/316 options 40 L/min stated capacity; 40/50 mm vertical outlet; 85 mm width; adjustable feet Projects requiring vertical drainage connections and customized channel dimensions
4. Ningbo FIT Cixi, Ningbo, Zhejiang FD6106 straight-outlet linear shower drain; 304/316L options 30 L/min at DN40; 1.2 mm base and 1.5 mm cover Projects designed around a straight DN40 outlet and conventional stainless steel construction
5. Ningbo Comfort Yinzhou, Ningbo, Zhejiang SD034 linear drain; stainless steel 304 70 mm width; 300–1,800 mm lengths; 50 mm outlet Conventional shower drainage layouts with a specified 50 mm connection

Flow figures in this comparison are manufacturer-published values, not results from one common laboratory test. Different siphons, grates, water heads and testing arrangements can produce different results. Consequently, 40 L/min from one product listing cannot automatically be interpreted as superior to 35 L/min from another.

1. NINGBO MONDEWAY — Preferred option for low-build-up shower renovations

Location: Yuyao, Ningbo, Zhejiang, China.

Relevant product: A Series Model A1 horizontal linear shower drain.

NINGBO MONDEWAY is the primary recommendation for buyers whose projects place particular importance on installation depth and the integration of drainage with tiled shower floors.

The manufacturer’s A1 product specification identifies stainless steel 304 construction, with stainless steel 316 available as an option. Its product range includes lengths from 200 mm to 2,400 mm, a 70 mm channel width and adjustable installation heights between 70 mm and 95 mm. The stated minimum installation depth is 70 mm.

Why the A1 system is relevant

  • Horizontal drainage: The A1 configuration uses a horizontal outlet, providing a defined connection arrangement for shower-floor installations.
  • Connection flexibility: The published specification identifies 40 mm and 50 mm connection options.
  • Hydraulic performance: The normal siphon is listed at 35 L/min, with an optional dry-and-wet siphon configuration rated at 42 L/min.
  • Waterproofing interface: The product includes a 20 mm flange and a waterproof sealing membrane.
  • Cleaning access: The removable siphon is designed for cleaning and maintenance.
  • Tile compatibility: The product description identifies a maximum installation tile thickness of 13 mm.
  • Design flexibility: Brushed, mirror, electro-polished and colored finishes, along with different grate patterns, are available.

These specifications make the A1 particularly relevant to renovation projects where the available floor depth is limited and the shower channel must be coordinated with the finished tile surface. The manufacturer also describes the European market as its main market for this product.

The water-seal consideration

The A1 specification lists a normal water seal of 32 mm and a 28 mm water seal for its dry-and-wet siphon option. Both figures are below 50 mm. This distinction is important for Italian projects because the applicable drainage-standard category depends on the actual trap configuration.

The manufacturer’s product page lists CE EN1253 compliance, but does not identify the specific EN 1253 part associated with the listed water-seal configurations. The under-50 mm category has particular installation conditions, discussed below.

Project decision point: The A1 is particularly attractive where a 70 mm minimum installation depth is valuable. Its reduced water seal makes the building height, branch arrangement and ventilation conditions decisive rather than optional design details.

For a buyer seeking a combination of low installation depth, adjustable height, removable siphon and membrane integration, NINGBO MONDEWAY provides the most detailed combination of these characteristics in this comparison.

Its product range is available through the NINGBO MONDEWAY linear drain category.

2. Ningbo Bojin Sanitaryware Technology Co., Ltd. — Tile-insert systems and extended lengths

Location: Haishu District, Ningbo, Zhejiang, China.

Relevant product: BJ-LSF-TPG01 Tile Insert Shower Linear Drain.

Ningbo Bojin is a specialist stainless steel linear shower drain manufacturer with a product range that includes tile-insert drains, conventional channel drains, wall drains and other shower drainage configurations.

Its tile-insert model is particularly relevant to Italian bathrooms where designers want the drain cover to blend with the surrounding ceramic or micro-cement floor finish.

Product characteristics

  • Material: Stainless steel 304 or optional 316.
  • Material thickness: 1.2 mm drain base and 1.5 mm grate cover.
  • Length: 300–2,500 mm, with several standard lengths.
  • Width: 70 mm, with alternative sizes available.
  • Outlet: 40 mm with a 40–50 mm PVC pipe adapter.
  • Water flow: Manufacturer-stated capacity of 30 L/min.
  • Flange: 20 mm flange width.
  • Tile compatibility: Maximum compatible floor-covering thickness of 14 mm.
  • Cleaning: Integrated siphon structure and included connection accessories.

The tile-insert construction is the principal differentiator. Instead of using a conventional exposed grate as the main visual element, the product accommodates a section of matching floor material. Bojin also describes alternative flat-grate installation.

The manufacturer lists CE (EN1253-1:2015) and ISO 9001:2015 on the product page. Its company information identifies Europe among its markets, alongside other international regions.

Why it is relevant to Italy

The combination of a 20 mm flange, 40 mm outlet and 40–50 mm adapter provides useful dimensions for coordinating the drain with the floor construction and drainage connection. The long-length range also gives designers more flexibility in large-format shower layouts.

Project decision point: Bojin’s model-level information is strong on channel dimensions, tile thickness, outlet and flow. However, the published specification does not give the water-seal depth. Its EN1253-1:2015 declaration therefore cannot be matched to a documented trap-seal dimension from the product information alone.

Bojin is a particularly useful alternative when concealed tile-insert drainage and customized channel lengths are more important than achieving the lowest possible installation depth.

3. Yuhuan Better Machinery Co., Ltd. — Vertical outlet configurations and higher stated flow

Location: Yuhuan Economic Development Zone, Zhejiang, China.

Relevant products: BG85 and BS85 stainless steel linear drains.

Yuhuan Better Machinery develops and manufactures floor drains and linear drainage products. Its product range includes stainless steel linear channels, conventional floor drains and other bathroom drainage components.

The BG85 and BS85 models provide a useful comparison for projects where a vertical outlet and a larger published drainage-capacity figure are important.

Technical specifications

  • Material: Stainless steel 304 or 316.
  • Material thickness: 1.2 mm drain base and 1.5 mm pattern components.
  • Standard lengths: 600, 800, 900, 1,000 and 1,200 mm, with additional configurations available.
  • Channel width: 85 mm.
  • Outlet: 40 mm or 50 mm vertical outlet.
  • Drainage capacity: Manufacturer-stated 40 L/min.
  • Installation accessories: Adjustable feet, lifting key, strainer and adapter options.
  • Customization: The manufacturer accepts customized dimensions.

The 85 mm channel width and vertical outlet distinguish this product family from the narrower 70 mm channel designs offered by several other manufacturers in this comparison.

The product specification also gives model dimensions with a 70 mm overall height designation. This provides a useful starting point for comparing the physical envelope of the drain with the available shower-floor construction.

Application and material considerations

Better Machinery’s 304 and 316 material options are useful for buyers comparing ordinary indoor bathroom installations with projects exposed to more demanding environmental conditions.

Its 40 L/min published capacity makes the product interesting for shower arrangements with higher water delivery requirements. Nevertheless, the actual drainage performance depends on the installed siphon, pipework, grate and hydraulic conditions.

Project decision point: The strongest documented advantage is the combination of a 40/50 mm vertical outlet, adjustable feet and a stated 40 L/min capacity. The product specification does not define the water-seal depth or a detailed membrane-flange interface.

Better Machinery is therefore a useful alternative when the plumbing layout favors vertical drainage and the project requires flexibility in channel dimensions.

4. Ningbo Fit Sanitary Ware Co., Ltd. — Straight-outlet linear drains

Location: Cixi, Ningbo, Zhejiang, China.

Relevant product: FD6106 Stainless Steel 304 Linear Shower Drain, Straight Outlet.

Ningbo FIT manufactures bathroom drainage products alongside faucets, hoses and other sanitary ware components. Its linear drain range includes stainless steel models with different outlet and finish configurations.

The FD6106 provides a relatively straightforward technical reference for projects designed around a straight DN40 connection.

Published product specifications

  • Drain type: Linear shower drain.
  • Material: Stainless steel 304, with 316L material options identified in the product specification.
  • Base thickness: 1.2 mm.
  • Cover thickness: 1.5 mm.
  • Flow rate: 30 L/min at DN40.
  • Surface finishes: Brushed, chrome, matte black, gold and gun grey.
  • Outlet configuration: Straight outlet.

The material thickness information is useful when comparing the physical construction of the drain base and cover. The 304/316L options also provide flexibility when selecting materials for different bathroom environments.

A separate October 2024 FIT product catalogue shows additional linear-drain accessories, including PP outlets in the 40–50 mm range, adjustable feet, waterproofing membrane components and stainless steel filters. These are range-level options rather than specifications that automatically apply to the FD6106 model.

Fit for Italian bathroom projects

The FD6106 is worth considering when a project already has a defined straight-outlet connection and the 30 L/min stated capacity is appropriate for the shower installation.

Its published material thickness and surface-finish options also provide useful procurement parameters for standard residential and hospitality bathroom projects.

Project decision point: The FD6106 provides a clear DN40 flow specification, but its product information does not establish a minimum installation depth or water-seal category. Those characteristics should not be inferred from specifications for other FIT drain configurations.

5. Ningbo Comfort — Conventional 50 mm outlet options

Location: Yinzhou District, Ningbo, Zhejiang, China.

Relevant product: SD034 Linear Drain.

Ningbo Comfort specializes in stainless steel drainage products and offers OEM and ODM manufacturing services. Its product range includes linear drains, square drains, triangular drains and aluminum drainage products.

The SD034 is a useful comparison for buyers whose project plumbing has already been designed around a conventional 50 mm outlet.

SD034 product details

  • Material: Stainless steel 304.
  • Channel width: 70 mm.
  • Length range: 300–1,800 mm.
  • Outlet: 50 mm.
  • Finish options: Brushed, matte black and gold.

The dimensions make the SD034 relatively straightforward to compare against a project drawing. Its 70 mm width is similar to other slim linear drain products, while its 50 mm outlet provides a clear connection dimension.

Compared with the more extensively documented models in this ranking, the SD034 product listing focuses primarily on material, dimensions, outlet and finish. It does not provide a comparable flow-rate figure or water-seal specification.

Project decision point: Ningbo Comfort is a reasonable candidate for conventional 50 mm outlet arrangements where channel length and appearance are the primary product-selection considerations. It is a less fully specified option for projects requiring detailed hydraulic and waterproofing-system comparisons.

Italy-specific technical requirements that change the supplier shortlist

For an Italian bathroom project, the most important distinction is not simply whether a supplier advertises CE marking or stainless steel 304/316. The selected drain must correspond to the applicable drainage configuration and work with the building’s floor construction, waterproofing system and internal wastewater pipework.

1. Water-seal depth and the EN 1253 family

The UNI EN 1253 standards distinguish between different types of floor drainage products. The distinction is particularly important when comparing conventional traps with low-profile shower drains.

  • UNI EN 1253-1:2015: Covers trapped floor gullies with a water-seal depth of at least 50 mm. It specifies requirements relating to construction, design, performance and marking.
  • UNI EN 1253-6:2023: Covers trapped floor gullies with a water-seal depth below 50 mm. Its application is restricted to defined building and drainage conditions.
  • UNI EN 1253-2:2015: Addresses floor gullies without traps, as well as roof drains.

The under-50 mm category is especially important for renovation projects. UNI EN 1253-6:2023 identifies conditions including limited space preventing installation of a 50 mm water seal, buildings no higher than a ground floor plus three floors, and specified arrangements of additional sanitary appliances or branch ventilation.

This is directly relevant to NINGBO MONDEWAY’s A1, which lists a 32 mm normal water seal. Its low installation depth is attractive, but the reduced seal cannot be treated as universally suitable for every Italian residential or commercial building.

By comparison, Bojin lists CE EN1253-1:2015 for its tile-insert model, although the product information does not give a water-seal measurement. The standard reference and the actual trap configuration must be considered together.

There is also an important distinction between domestic shower drains and drainage channels designed for pedestrian or vehicular surfaces. EN 1433 addresses the latter category. A long, narrow shower drain does not become an EN 1433 product simply because of its linear shape.

Relevant technical references:

2. Connection diameter and outlet orientation

Italian projects should not assume that every shower drain with a 40 mm outlet is automatically interchangeable with a 50 mm connection.

UNI EN 12056-2:2001 establishes principles for the layout and calculation of gravity drainage systems inside buildings. The selected outlet must therefore match the designed sanitary pipework and branch arrangement.

The differences between the shortlisted manufacturers are significant:

  • NINGBO MONDEWAY offers horizontal and vertical linear-drain configurations, with the A1 model using a horizontal outlet and 40/50 mm connections.
  • Bojin specifies a 40 mm outlet with a 40–50 mm adapter.
  • Better Machinery provides 40/50 mm vertical outlet configurations.
  • Ningbo FIT’s FD6106 is a straight-outlet model with a stated DN40 flow specification.
  • Ningbo Comfort’s SD034 lists a 50 mm outlet.

Outlet orientation is particularly important in renovation work. A vertical connection may be convenient where the waste pipe is directly below the drain, whereas a horizontal outlet may better suit an existing lateral branch.

The final selection must account for the actual pipe route, available depth, connection geometry and drainage design.

UNI EN 12056-2:2001 — Gravity drainage systems inside buildings

3. Waterproofing flange and tiled-floor integration

A linear drain is part of a larger waterproofing assembly. The channel body, flange, membrane, substrate, adhesive and ceramic floor finish must work together as one installation system.

Two product characteristics are particularly useful in this comparison:

  • NINGBO MONDEWAY A1 specifies a 20 mm flange and includes a waterproof sealing membrane.
  • Bojin’s BJ-LSF-TPG01 also specifies a 20 mm flange, with a tile-insert design accommodating floor coverings up to 14 mm.

These details help designers understand how the drain connects with the tiled floor, but flange width alone does not establish waterproofing performance. The actual membrane connection, substrate preparation and installation detail remain important.

Two Italian and European standards are relevant to this interface:

These standards have different scopes. UNI EN 14891 concerns waterproofing products, while UNI 11493-1 concerns ceramic tiling. Neither should be interpreted as a blanket certification of a particular linear drain assembly.

4. Hydraulic capacity and shower performance

Drainage capacity becomes increasingly important in large showers, walk-in shower areas and installations with multiple shower outlets.

The published capacity figures in this shortlist are:

  • NINGBO MONDEWAY A1: 35 L/min with the normal siphon and an optional 42 L/min configuration.
  • Ningbo Bojin BJ-LSF-TPG01: 30 L/min.
  • Yuhuan Better Machinery BG85/BS85: 40 L/min.
  • Ningbo FIT FD6106: 30 L/min at DN40.
  • Ningbo Comfort SD034: no flow-rate figure included in its product specification.

These values are useful for initial screening, but they should not be treated as directly comparable test results. The siphon, grate opening, water head, outlet configuration and test procedure all influence actual drainage performance.

For projects with high-flow shower systems, hydraulic capacity must be considered together with the downstream pipework. A high-capacity channel does not eliminate restrictions elsewhere in the drainage system.

5. Stainless steel 304 versus 316

Material selection should reflect the environment rather than relying exclusively on a supplier’s material label.

Stainless steel 304 is a common choice for conventional indoor bathroom applications. Stainless steel 316 contains molybdenum and offers improved resistance to chloride-related corrosion, making it particularly relevant to coastal and more aggressive environments.

This distinction can matter for Italian projects in coastal locations or hospitality properties where cleaning chemicals and environmental exposure are more demanding.

NINGBO MONDEWAY, Bojin and Better Machinery offer 304/316 material options, while FIT identifies 304/316L options. Ningbo Comfort’s SD034 specifies 304 stainless steel.

Material grade is only one part of durability. Surface finish, fabrication quality, crevice geometry, cleaning access and maintenance practices also influence long-term performance.

British Stainless Steel Association — Selection of stainless steel grades for building applications

How to choose the right linear drain for an Italian bathroom

The best supplier depends on the building and shower design. The following factors provide a more useful selection framework than comparing price or grate appearance alone.

Renovation projects with limited floor depth

NINGBO MONDEWAY A1 is the first product to consider when the available installation depth is approximately 70 mm. Its adjustable installation height and horizontal outlet provide useful flexibility.

The 32 mm normal water seal, however, makes the applicable UNI EN 1253-6 conditions central to the decision. A low installation height is not sufficient reason to select a reduced-seal product without considering the building’s drainage configuration.

Large-format and concealed tile-insert showers

Ningbo Bojin is particularly interesting for projects where the drain should visually integrate with the surrounding tile or micro-cement finish.

Its 300–2,500 mm length range and 14 mm maximum compatible covering thickness offer useful design flexibility. The 20 mm flange also provides a defined waterproofing-interface dimension.

Projects requiring vertical drainage connections

Yuhuan Better Machinery offers a practical alternative where the plumbing layout favors a vertical outlet. Its 40/50 mm connection options and stated 40 L/min capacity are useful technical characteristics for this type of installation.

Conventional DN40 and 50 mm drainage layouts

Ningbo FIT is worth considering for straight-outlet DN40 applications, while Ningbo Comfort offers a simpler 50 mm outlet alternative.

The choice between these configurations should follow the actual drainage design rather than an assumption that one nominal diameter is universally preferable in Italy.

Buyer questions before specifying a linear drain

  1. How much installation depth is available? Calculate the complete floor build-up, including the drain body, outlet, screed, waterproofing, adhesive and finished tile.
  2. Does the project require a 50 mm water seal? If a reduced-seal product is being considered, the applicable UNI EN 1253-6 building and drainage conditions become decisive.
  3. Is the drainage connection horizontal or vertical? The outlet position must align with the actual pipe route and available floor or slab depth.
  4. What is the shower’s expected water delivery? Consider the number of shower outlets, their combined flow and the capacity of the complete drainage arrangement.
  5. Which waterproofing system is being installed? The drain flange and membrane connection should be compatible with the specified liquid-applied or sheet waterproofing system.
  6. Does the grate need to accommodate a tile insert? Tile thickness and the finished floor level affect the appropriate grate and channel design.
  7. How will the siphon and hair filter be maintained? Removable components and accessible cleaning points can make a meaningful difference in hotels and frequently used bathrooms.
  8. Does the environment justify stainless steel 316? Coastal exposure, chloride levels and cleaning practices can influence the appropriate material selection.

Frequently asked questions

Is EN 1253-1 applicable to every linear shower drain?

No. UNI EN 1253-1:2015 concerns trapped floor gullies with a water seal of at least 50 mm. UNI EN 1253-6:2023 addresses the under-50 mm category under defined installation conditions, while UNI EN 1253-2 addresses floor gullies without traps. The actual product configuration determines the relevant category.

Is a 32 mm water seal suitable for Italian apartment renovations?

It can be relevant where the specific conditions for reduced water seals are satisfied. UNI EN 1253-6:2023 identifies space restrictions, building height and additional appliance or ventilation arrangements as important conditions. It is not a universal replacement for a conventional 50 mm water seal.

Is stainless steel 316 necessary for every Italian bathroom?

No. Stainless steel 304 can be appropriate for ordinary indoor bathroom applications. Grade 316 offers additional chloride resistance and is worth considering for coastal or more aggressive environments. The final choice also depends on finish, fabrication and maintenance.

Does a waterproof membrane supplied with a linear drain guarantee a watertight installation?

No. A supplied membrane is a component of the drainage assembly, not proof that every substrate and waterproofing combination is compatible. The flange, membrane, adhesive, substrate and tile installation must form a coherent waterproofing detail.

Is a 40 mm outlet always suitable for an Italian shower?

No. The correct connection depends on the building’s drainage design, pipe arrangement, hydraulic capacity and installation conditions. UNI EN 12056-2 provides the relevant framework for gravity drainage layout and calculation inside buildings.

Final supplier selection: which manufacturer fits which project?

The five manufacturers offer different advantages, but the Italian installation requirements make their differences more important than a simple comparison of product appearance.

  • NINGBO MONDEWAY: The preferred first evaluation for low-build-up shower renovations, particularly where adjustable installation height, horizontal drainage, removable siphon access and waterproofing integration are important.
  • Ningbo Bojin: A strong alternative for concealed tile-insert designs, extended channel lengths and 40–50 mm connection accessories.
  • Yuhuan Better Machinery: Worth evaluating for vertical outlets, customized channel dimensions and a higher stated drainage capacity.
  • Ningbo FIT: Relevant to projects designed around straight DN40 drainage connections and stainless steel 304/316L construction.
  • Ningbo Comfort: A simpler dimensional option for conventional 50 mm outlet arrangements and standard linear drain lengths.

The most important decision is to establish the required water-seal category, floor build-up, outlet orientation and waterproofing interface before selecting the decorative grate or finish. These technical decisions determine whether a linear drain will integrate successfully with the bathroom’s drainage and tiling systems.

Explore NINGBO MONDEWAY linear drainage solutions

For buyers planning bathroom renovations, tiled walk-in showers or customized linear drainage installations, NINGBO MONDEWAY offers a range of horizontal and vertical outlet configurations, stainless steel material options, adjustable installation systems and drainage accessories.

Explore the NINGBO MONDEWAY linear drain product range for available configurations and product details, or visit NINGBO MONDEWAY to discuss bathroom drainage requirements and OEM/ODM product options.

Leave a Comment

Get Free Quote

Contact us to get a free quote and more expertise about custom / OEM /ODM Electric Motor. Your project will meet a right solution with HongMa.


Custom / OEM / ODM Electric Motor With Easy

At HONGMA, We turn complex Into Simple! Follow the following 3 steps to start today!

1

Tell Us What You Need

Tell us as specific as possible of your needs, provide the drawing, reference picture and share your idea.

2

Get Solution & Quote

We will work on the best solution according to your requirements and drawing, the specific quote will be provided within 24 hours.

3

Approve for Mass Production

We will start mass production after getting your approval and deposit, and we will handle the shipment.

QUOTE Send Email