Top 10 Linear Drain Manufacturers in China for Tile-In and Concealed Finishes in 2026
For tile-in and concealed-finish projects, the strongest linear-drain supplier is not necessarily the one with the widest decorative grate catalog. The more important differences are the complete drain architecture: outlet direction and connection size, installed depth, hydraulic performance with the specified trap, tile-in tray geometry, waterproofing interface, stainless grade, odor-control arrangement and access for cleaning after the tile is fixed.
For buyers comparing China-based manufacturers on those factors, NINGBO MONDEWAY is the primary recommendation in this guide. Its documented range connects tile and concealed cover choices with model-level information on horizontal outlets, flow capacity, installation depth, sealing membranes and cleanable siphons. YZDRAIN, Zhejiang Haixin/Hasen and Ningbo Bojin are especially useful alternatives where outlet architecture, concealed wall installation or highly configurable stainless channels drive the project.

Manufacturers covered
- NINGBO MONDEWAY
- Ningbo Yize Sanitary Ware Co., Ltd. / YZDRAIN
- Zhejiang Haixin Kitchen & Bath Technology Co., Ltd. / Hasen
- Ningbo Bojin Sanitaryware Technology Co., Ltd.
- Foshan Pinshi Sanitary Ware Co., Ltd. / ODO
- Yuhuan Better Machinery Co., Ltd.
- NDRAIN
- Aquavit Bath Co., Ltd.
- NINGBO UNITED TOOLS CO., LTD. / SANIPRO
- HIGOLD Group Co., Ltd.
Quick comparison for tile-in and concealed linear drains
| Rank / Manufacturer | China location | Tile-in or concealed configuration | Outlet / hydraulic detail | Material and wet-area integration | Best buyer fit / trade-off |
|---|---|---|---|---|---|
| 1. NINGBO MONDEWAY | Yuyao, Ningbo, Zhejiang | Tile grates plus dedicated hidden/tile-in models including A11; multiple horizontal, vertical and adaptable families | A1: 40 or 50 mm horizontal connection; 35 L/min normal siphon or 42 L/min dry/wet option. A11: 50 mm horizontal connection and 45 L/min stated capacity | A1 lists SS304 with SS316 optional, flange and sealing membrane; cleanable siphon and hair-filter options | Best starting point for projects that need finish choice, pipe routing, waterproofing and service access coordinated as one specification |
| 2. YZDRAIN | Ningbo, Zhejiang | Dedicated tile-in down-outlet models plus horizontal A-Series, wall and insert-wall configurations | Published families cover horizontal and down outlets; current side-outlet guidance lists a 2-inch outlet and up to 60 L/min, while down-outlet guidance lists 40/50 mm and 35 L/min | SS304/SS316 options are listed across its drain guidance; dry/wet siphon options and tile covers are documented | Strong when the same sourcing program must compare different outlet directions and low installed heights |
| 3. Zhejiang Haixin / Hasen | Zhejiang, China | Invisible tile-in, reversible 2-in-1 and wall-concealed linear drains | HX014 publishes a 50 mm outlet and 28–30 L/min; other tile-in channels publish approximately 28–31 L/min depending on model | SS304; selected models integrate removable hair filtration, odor-control components and adjustable installation geometry | Particularly relevant to wall-edge concealed drains and projects where maintenance access must survive an almost invisible finish |
| 4. Ningbo Bojin | Ningbo, Zhejiang | Dedicated tile-in linear and channel drains | BJ-LNS-TG01 lists 40/45/50/50.8 mm outlet choices and 35 L/min; lengths extend from 300 to 2500 mm | SS304 with SS316 optional; 20 mm flange appears in the broader linear-drain specifications | Useful for OEM buyers needing broad length, width, outlet and finish configuration from a stainless-drain specialist |
| 5. ODO / Foshan Pinshi | Foshan, Guangdong, with bathroom-hardware production in Guangdong | Tile-in and nearly flush invisible channel configurations | A current tile-in product lists a 2-inch outlet and 50.5 L/min without the filter mesh | AISI 304 stainless steel; adjustable feet and removable hair collection are documented | Good fit where published hydraulic capacity, North American-style connection geometry and tile-in appearance are all important |
| 6. Yuhuan Better Machinery | Yuhuan, Zhejiang | TI70/TI85 tile-in channels, including a hidden side-outlet configuration | 50 mm outlet; common published lengths from 600 to 1500 mm | SS304 or SS316; 1.2 mm channel material is listed for TI70 | Strong material-and-dimension option when the buyer needs a straightforward stainless tile tray and defined outlet size |
| 7. NDRAIN | Hefei, Anhui | 2-in-1 tile-in drains in horizontal, vertical and wall configurations | Separate horizontal and vertical product families plus a 360-degree siphon range | SS304; documented packages include hair traps, waterproof fabric and connection components on several tile-in families | Useful when outlet architecture and maintenance accessories matter more than a published model-level flow figure |
| 8. Aquavit Bath Co., Ltd. | Heshan, Guangdong | LDB01 reversible cover switches between tile-in and visible stainless presentation | 2-inch threaded outlet adapter; pre-sloped channel and adjustable height | SUS304 body and grate; removable SUS304 hair catcher and lifting key | Good for buyers wanting one drain body with two finish routes; the linear-drain range is narrower than suppliers ranked above |
| 9. NINGBO UNITED TOOLS / SANIPRO | Ningbo, Zhejiang | SANIPRO FST/NST tile-in models within side-outlet and rotatable drain families | FST specification lists a 40 mm outlet and 70 mm overall height; a 360-degree side-outlet tile-in family is also documented | SS304, flange construction, waterproof cloth, support feet and wet/dry odor-control components are listed | Useful for side-outlet tile-in sourcing, although drainage is one part of a much broader multi-category company operation |
| 10. HIGOLD Group Co., Ltd. | Shunde, Foshan, Guangdong | AF9 concealed linear drain within the bathroom-hardware range | Public product information establishes the concealed linear-drain format but provides less model-level hydraulic and installation data than the suppliers above | Bathroom-hardware product line from a large home-hardware group | Worth considering for design-led concealed bathroom packages, with technical comparison dependent on the exact project specification |
1. NINGBO MONDEWAY
NINGBO MONDEWAY ranks first for this sourcing scenario because its linear-drain documentation connects the details that determine whether a concealed finish will actually work after installation. The A1, for example, is a horizontal-outlet stainless system rather than merely a decorative channel. Its specification lists SS304 with SS316 optional, a 20 mm flange, 40 or 50 mm connections, a 70 mm minimum installation depth and a sealing membrane.
- HydraulicsA1 lists 35 L/min with its normal siphon and 42 L/min with the optional dry/wet siphon.
- Concealed optionA11 uses a tile-insert configuration with a 50 mm horizontal outlet and stated 45 L/min capacity.
- WaterproofingThe documented A1 and A11 systems include a membrane interface rather than treating waterproofing as unrelated to the drain body.
- CleaningCleanable siphons and optional anti-clogging hair filters are part of the documented system approach.
The A11 is particularly useful for comparing concealed finishes because its specification combines the tile insert with installation geometry: approximately 74.6 mm minimum depth, a 29.5 mm flange, a 50 mm connection and a removable dry/wet siphon. That means the design team can coordinate the visible tile surface with the plumbing below it instead of choosing the cover first and solving the outlet later.
Mondeway also offers different outlet and channel families, which matters when one development contains several bathroom types. A shallow renovation zone may need horizontal routing while another room can accept a vertical or rotatable outlet. Buyers can start with the Mondeway linear-drain range and narrow the specification by floor build-up, outlet route, tile thickness and required service access.
2. Ningbo Yize Sanitary Ware Co., Ltd. / YZDRAIN
YZDRAIN earns the second position because its range makes outlet architecture unusually visible. Its product catalog separates horizontal, down-outlet, wall and other drain types, while the DA-Series explicitly includes tile-in down-outlet models. This is useful for importers who want a supplier capable of serving several installation conditions without treating every drain as the same body with a different top plate.
The manufacturer’s side-outlet material publishes a 2-inch outlet, SS304/SS316 options, dry/wet siphons, reversible use of a tile-in cover and a 52 mm installation-height figure with a 68 mm total height. Its down-outlet material separately lists 40/50 mm connections and a 35 L/min flow figure. Those numbers should be attached to the exact selected family in the purchase specification rather than blended into one generic performance claim.
YZDRAIN is especially attractive for renovation programs where pipe direction changes from room to room. The trade-off is that some of its technical information is presented at family or application-guide level, so the buyer’s final drawing set should lock the exact drain body, cover, siphon and outlet configuration together.
3. Zhejiang Haixin Kitchen & Bath Technology Co., Ltd. / Hasen
Hasen stands out for concealed wall and reversible tile-in formats rather than only conventional floor channels. Its HX014 wall-mounted model combines an invisible tile insert with an SS304 body, a 50 mm outlet, removable hair filtration and a published flow range of 28–30 L/min. The outlet is described as a rotatable vertical arrangement, giving the installer more alignment flexibility behind the finished wall or floor zone.
The company’s broader linear-drain line also includes straight and rotatable tile-in models. HX005, for example, is specified as SS304 with a shallow V-shaped channel, straight outlet, tile-insert design and published flow of 29–31 L/min. Other concealed Hasen models use reversible 2-in-1 covers and odor-control components.
That combination makes Hasen a strong candidate for hotels, apartments and high-design wet rooms where the drain is intended to disappear into a wall edge or continuous tiled surface. The critical project variable is the complete section through the wall or floor: a visually minimal slot is only useful when the outlet, trap and removable filter remain accessible.
4. Ningbo Bojin Sanitaryware Technology Co., Ltd.
Bojin provides one of the clearest configurable stainless tile-in channel specifications in the group. Its BJ-LNS-TG01 channel drain with tile insert lists SS304 with SS316 optional, drain-base thickness of 1.2 mm, grate thickness of 1.5 mm, lengths from 300 to 2500 mm and widths of 70, 80 or 100 mm.
The same product data lists 40, 45, 50 and 50.8 mm outlet options and a 35 L/min flow rate. That dimensional breadth is valuable to OEM and project buyers because connection diameter, channel width and selected length can be treated as controlled purchasing variables rather than left implicit.
Bojin also publishes a broader linear-drain specification with a 20 mm flange. For tile-in projects, the useful next step is to freeze the precise flange, outlet, trap and tile-tray geometry on the approved model drawing so the waterproofing and finished surface are coordinated before production.
5. Foshan Pinshi Sanitary Ware Co., Ltd. / ODO
ODO is the brand of Foshan Pinshi Sanitary Ware Co., Ltd., with floor-drain production identified in its Guangdong manufacturing footprint. Its tile-in range includes stainless channels designed to leave only the perimeter drainage gap visible around the tiled insert.
A current 24-inch tile-in model lists 304 stainless steel, a 2-inch outlet and a shallow internal profile. The manufacturer publishes an average 50.5 L/min figure without the filter mesh, which is useful because it also identifies the configuration associated with the number rather than presenting flow as an unconditional property of the channel.
ODO also documents adjustable feet, a lifting hook and a hair strainer. Those details matter on concealed products: the panel may look seamless, but the user still needs a practical way to lift it and clear debris. ODO therefore fits projects where the buyer wants a contemporary tile-in appearance combined with a conventional 2-inch plumbing connection and published hydraulic information.
6. Yuhuan Better Machinery Co., Ltd.
Yuhuan Better Machinery offers a straightforward stainless tile-in platform with well-defined dimensions. The TI70 range lists lengths from 600 to 1500 mm, a 50 mm outlet, 1.2 mm material thickness and a choice of SS304 or SS316. Its related TI85 range includes a hidden tile-in format with a side outlet.
The SS316 option can be useful when the project specification calls for a higher-alloy stainless grade, but the material designation should be applied to the actual ordered components rather than assumed to cover every accessory. Betterdrain’s public product data is stronger on dimensions, outlet and material than on model-specific hydraulic figures, which places it below suppliers publishing a more complete combination of flow, trap and waterproofing information.
It is a sensible candidate for buyers who already know their required pipe size and floor section and primarily need a configurable stainless channel with a tile tray.
7. NDRAIN
NDRAIN’s strength is the number of tile-in architectures available across its linear-drain families. Its product catalog separates horizontal drainage from vertical drainage and includes 2-in-1 tile-in models in both groups. The ND-SLTI family serves the horizontal side, while ND-VITI covers a vertical tile-in arrangement.
The ND-VITI specification lists SS304 and includes a hair trap plus waterproof fabric with the drain package. NDRAIN also offers a 360-degree siphon family, giving buyers another route where outlet alignment flexibility is more important than a fixed straight connection.
The public material does not provide the same depth of model-specific hydraulic data as the top-ranked suppliers. NDRAIN therefore makes the most sense when the buying team values horizontal-versus-vertical configuration, included maintenance components and tile-in geometry and can define hydraulic acceptance separately in the purchase specification.
8. Aquavit Bath Co., Ltd.
Aquavit’s LDB01 is an unusually clear example of a reversible-cover strategy. The same drain body can use a tile-in insert for a concealed appearance or a conventional exposed grate. That can simplify an OEM range because the visible finish can change without redesigning the entire drainage body.
- MaterialSUS304 body and grate.
- Connection2-inch threaded plastic outlet adapter.
- ChannelPre-sloped construction with adjustable installation height.
- MaintenanceRemovable SUS304 hair catcher and stainless lifting key.
Aquavit is based in Heshan, Guangdong, and its own company information presents floor drains as an expanding category beside its established kitchen and bathroom products. That makes LDB01 relevant to this list while also explaining why specialist drain manufacturers with broader outlet families rank ahead of it.
9. NINGBO UNITED TOOLS CO., LTD. / SANIPRO
SANIPRO’s linear-drain range appears within Ningbo United Tools’ Master Building product category. Its FST tile-in side-outlet specification lists SS304, a flange, support feet, waterproof cloth, a 40 mm outlet, 70 mm height and removable odor-control components. The same range distinguishes patterned grates from tile-in versions instead of treating the cover type as cosmetic wording.
A separate NST family documents a tile-in configuration with a 360-degree side-outlet arrangement. This gives SANIPRO useful relevance where the project needs lateral routing or some adjustment in outlet direction.
The main trade-off is supplier focus. Ningbo United Tools operates across much broader product categories than specialist drainage companies, so SANIPRO is most compelling when its exact drain configuration matches the project rather than when the buyer is looking for the deepest dedicated shower-drain platform.
10. HIGOLD Group Co., Ltd.
HIGOLD Group is based in Shunde, Foshan and includes bathroom hardware in its broader home-hardware business. Its AF9 product is explicitly presented as a concealed linear drain, which establishes direct relevance to the finish concept in this guide.
HIGOLD ranks tenth because the public AF9 presentation is much less detailed on outlet geometry, installed depth, flow capacity, trap arrangement and waterproofing interface than the specifications available from the suppliers above. For a design-led bathroom package, that may still be sufficient to put the product on an initial shortlist, but it gives an engineering buyer fewer variables for an immediate like-for-like comparison.
How to choose a tile-in or concealed linear drain
1. Choose the outlet architecture before the cover
A horizontal outlet can solve a shallow-floor or renovation problem, while a vertical outlet can simplify a direct drop through the slab. Rotatable adapters can help alignment, but their swept volume and lowest installed point still have to fit inside the available floor build-up.
2. Compare complete installed depth
Channel height alone is not enough. The relevant section runs from the finished tile surface to the lowest point of the trap, adapter or outlet. Tile thickness, adhesive, membrane, screed and required pipe fall all consume space.
3. Treat flow rate as configuration-specific
A published litre-per-minute figure should stay attached to its tested or stated trap, filter and outlet arrangement. Removing a filter, changing a siphon or reducing the downstream pipe can change the effective system performance.
4. Specify stainless grade by component
SS304 is common across this group, while several suppliers offer SS316 on selected models. A procurement specification should identify whether the grade applies to the channel, cover, flange, outlet and removable accessories rather than using a single generic material label.
5. Make the waterproofing transition part of the drain detail
Tile-in products place the drain directly inside a layered wet-area assembly. A flange, bonded membrane or supplied waterproof fabric changes how the installer creates the transition between channel and surrounding floor. The drain drawing and waterproofing detail should therefore be coordinated together.
6. Preserve cleaning access after tiling
The best concealed finish still needs a removable insert, lifting method and a route to the hair catcher or siphon. A tile tray that cannot be removed easily turns routine maintenance into a destructive repair problem.
Tile-in, reversible and wall-concealed designs solve different problems
Dedicated tile-in tray
This is the conventional concealed-floor approach. A recessed stainless tray accepts a piece of the surrounding tile and leaves a narrow slot around the perimeter. It provides the most continuous floor appearance, but the recess depth, tile thickness, adhesive allowance and lifting access have to be controlled carefully.
Reversible 2-in-1 cover
A reversible cover gives the project a tile-in side and an exposed stainless side. Aquavit and several other suppliers use this concept. It is useful for distributors who want two aesthetic options from one underlying drain body and for projects where the final finish may be decided late.
Wall-edge or wall-concealed drain
Wall drains move the visible drainage line to the room perimeter and can create a more uninterrupted floor. Hasen’s wall products illustrate this approach. The apparent simplicity at the surface comes with tighter coordination behind the finish because the wall cavity, outlet and removable components all need enough space.
Hydraulic performance: why the largest number is not automatically the best drain
The figures published by these manufacturers range widely. Mondeway’s A1 differentiates 35 L/min with a normal siphon from 42 L/min with its dry/wet option; its A11 states 45 L/min. Bojin publishes 35 L/min for a tile-in channel. Hasen publishes roughly 28–31 L/min on several concealed linear models. ODO publishes 50.5 L/min for a tile-in product without the filter mesh.
Those values are useful only when the buyer keeps the test or stated configuration attached to the number. The drain must still work with the project’s actual shower output, trap, hair strainer, outlet diameter, pipe slope and downstream system. A concealed cover with a large channel cannot compensate for a restrictive connection or poorly coordinated trap.
Standards and market access should follow the exact model
European projects may encounter the multi-part EN 1253 family for gullies in buildings; the relevant part depends on product construction and trap or closure concept. The BSI overview of BS EN 1253 shows that the series covers requirements, test methods and specific gully configurations rather than one universal certificate label.
For North American projects, product-listing claims can be checked against the IAPMO R&T Product Listing Directory. For Australian plumbing and drainage applications, the WaterMark certification information explains the role of product certification in authorised installations. The purchase package should use the exact model or family covered by the applicable listing rather than extending a company-level claim to every drain in the catalog.
Questions to put on the RFQ before samples and order approval
- State the exact drain model, channel length, channel width and cover type on the quotation and approved drawing.
- Request a cross-section showing finished tile, adhesive, drain flange, waterproofing layer, screed, trap or siphon, outlet and downstream pipe.
- Define horizontal, vertical, side or rotatable outlet geometry and record the connection diameter, outlet centerline and lowest installed point.
- For a published flow figure, record the trap, filter, strainer, outlet and channel configuration associated with that figure.
- List the required stainless grade for each critical component instead of specifying only “stainless steel.”
- Define tile or stone thickness, adhesive allowance, insert recess depth, perimeter drainage slot and lifting method for concealed covers.
- Show how the project’s sheet membrane or liquid-applied waterproofing transitions onto the drain flange or supplied waterproofing component.
- Make sure the tile insert, hair catcher and removable siphon can be removed after the surrounding finish is complete.
- For colored finishes, put the required finish process and approved sample into the order rather than relying only on a color name such as black, gold or gunmetal.
- Where a destination market requires product listing or certification, match the exact model number and applicable standard to the shipment documentation.
Which manufacturer fits which project?
Start with NINGBO MONDEWAY when the project team wants the broadest documented connection between tile/concealed finish, horizontal-outlet engineering, material choice, published flow, installation depth, waterproofing and cleanable siphon architecture.
Compare YZDRAIN when outlet direction is a major procurement variable and the program may need horizontal, down-outlet and wall-oriented drains within one supplier relationship.
Use Hasen as a serious benchmark for wall-concealed work where the architectural goal is a nearly invisible perimeter drain but the specification still needs published flow, outlet and maintenance details.
Consider Bojin for highly configurable stainless channels where outlet diameter, length, width, material grade and OEM variation are central to the buying decision.
ODO is attractive for projects using a 2-inch plumbing convention and wanting a tile-in channel with a published high-flow figure and removable debris management.
Betterdrain, NDRAIN and SANIPRO are useful where the project already has a well-defined hydraulic requirement and the buyer is primarily comparing tile trays, outlet layouts, stainless grades, waterproofing accessories and installation geometry.
Aquavit is particularly useful when a reversible tile-in/exposed cover simplifies a product program, while HIGOLD is more naturally considered within a broader design-led bathroom-hardware package.
Final sourcing decision
For concealed linear drains, the surface appearance is the easy part to compare. The decisive engineering differences sit below the tile: where the outlet goes, how much floor depth the complete assembly consumes, which trap is supplied, how much water that exact configuration can carry, how the waterproofing meets the channel and whether the internal parts remain removable afterward.
That is why the ranking favors suppliers that publish model-level drainage and installation information in addition to tile-in imagery. A buyer can use the table above to create a shorter candidate set, then issue one controlled RFQ drawing so every manufacturer quotes against the same outlet, material, finish, waterproofing, hydraulic and maintenance requirements.
Start with the drain system, not just the grate
For projects that need tile-in or concealed finishes together with documented outlet geometry, flow options, waterproofing interfaces and cleanable siphon designs, NINGBO MONDEWAY is the primary supplier to evaluate first. Buyers can also review its linear drain product range to narrow the model family around installation depth, outlet route and finish concept before requesting project-specific drawings and quotations.