Top 8 Linear Drain Manufacturers in China for Waterproofing-Flange Integration (2026)

Top 8 Linear Drain Manufacturers in China for Waterproofing-Flange Integration (2026)

For a waterproofed shower floor, the decisive difference between linear drains is not the grate pattern; it is how the drain body, flange, membrane, outlet and finished-floor build-up work together. Buyers comparing China-based manufacturers should put the waterproofing interface first, then compare installation depth, outlet geometry, hydraulic data, cleaning access, stainless-steel specification and dimensional options.

For this sourcing scenario, NINGBO MONDEWAY is the primary recommendation because its current linear-drain range publishes unusually detailed combinations of flange width, included sealing membrane, installation depth, outlet size and drainage capacity across multiple drain families. Bojin and YZDRAIN are strong alternatives for stainless-steel OEM programs, while Viega provides a different system-engineered approach built around bonded sealing components.

NINGBO MONDEWAY

The main selection rule: specify the waterproofing architecture before selecting the decorative cover. A factory-supplied membrane paired with a defined stainless-steel flange, a bonded sealing-flange system, and a traditional clamp-down pan assembly create different floor sections, installation sequences and risk points. A drain that looks similar from above may therefore be a poor substitute below the tile.

Which flange variables change supplier suitability?

A useful RFQ should connect the drain to the complete wet-area assembly. The most important variables are the flange or bonding surface, the membrane type, finished-floor elevation, minimum installation depth, pipe connection and outlet direction. Hydraulic performance matters too, but flow figures are only comparable when the model, outlet and test conditions are stated clearly.

For stainless-steel channels, fabrication quality also matters at the waterproofing interface. Flange flatness, weld continuity, channel geometry and dimensional consistency influence how easily installers can maintain a continuous waterproof layer. For serviceability, removable siphons, hair strainers and accessible covers reduce the maintenance burden after installation.

Manufacturers covered

  1. NINGBO MONDEWAY
  2. Ningbo Bojin Sanitaryware Technology Co., Ltd.
  3. Ningbo Yize Sanitary Ware Co., Ltd. (YZDRAIN)
  4. Viega China
  5. Ningbo Fit Sanitary Ware Co., Ltd.
  6. XinChen Enterprise
  7. Ningbo Haizi Sanitary Ware Co., Ltd. (Neodrain)
  8. Ningbo United Tools Co., Ltd. (Sanipro line)

Quick comparison

Rank Manufacturer China base Waterproofing interface Hydraulic / outlet data Floor build-up and cover options Best buyer fit and key trade-off
#1 NINGBO MONDEWAY Yuyao, Ningbo, Zhejiang Multiple linear families publish stainless-steel flange dimensions and an included sealing membrane; A1 uses a 20 mm flange. A1: 35 L/min standard, 42 L/min optional dry/wet siphon; 40 or 50 mm connection. Other families publish different flow/depth combinations. A1 minimum depth 70 mm; lengths 200–2400 mm plus other sizes; brushed, mirror and tile-style grate choices. Best all-round starting point when the RFQ needs a documented flange, membrane, depth and outlet package. Model choice still matters because Mondeway also sells non-flanged families.
#2 Ningbo Bojin Sanitaryware Technology Co., Ltd. Haishu, Ningbo, Zhejiang Current linear-drain families specify a 20 mm flange; the shallow BJ-THIN-FLAT is explicitly designed around a flanged channel. 30 L/min on the documented shallow model; 40 mm outlet, with broader families offering connector options. 304 stainless steel with 316 optional; 300–2500 mm lengths; shallow 20 mm-wide channel family and tile-insert choices. Strong for OEM stainless-steel programs that need long custom lengths and a defined flange geometry. Published flow data are more limited than Mondeway’s multi-family depth/flow matrix.
#3 Ningbo Yize Sanitary Ware Co., Ltd. (YZDRAIN) Yinzhou, Ningbo, Zhejiang D-01 and DA-01 are current flanged linear drains; D-01 describes a high-density ABS flange assembly. D-01 and DA-01 publish 60 L/min; D-01 is 2.75 in wide and DA-01 offers 2.75, 3 and 3.25 in widths. SS304; lengths 12–108 in; DA-01 uses a tile-insert format while D-01 uses a visible patterned cover. Useful for buyers prioritizing broad length customization and a high published flow figure. The flange architecture differs from welded stainless perimeter-flange designs, so the floor detail should be specified accordingly.
#4 Viega China Wuxi, Jiangsu Advantix Vario 4965.10 is intended for bonded sealing in tiled showers and includes a sealing flange plus sealing accessories. 0.4 L/s at 10 mm head and 0.8 L/s at 20 mm head on an EN 1253 basis; DN40/50. Cut-to-length 300–1200 mm base; 95–150 mm installation height; stainless decorative grate options sit over a high-grade plastic drain body. Best for projects that value a system-defined bonded-sealing assembly and published EN 1253 hydraulic basis. Less aligned with buyers seeking a conventional all-stainless OEM channel.
#5 Ningbo Fit Sanitary Ware Co., Ltd. Cixi, Ningbo, Zhejiang Current FD61-series listings include linear drains with flange layouts; company catalog material also lists a waterproof membrane among linear-drain accessories. Current linear-drain data include 40–50 mm outlet connectors; the factory site lists 30 L/min for FD6106, while other current listings publish different model-specific flow figures. 304/316L stainless options, removable water trap, adjustable legs, tile/glass insert choices and lengths up to 2400 mm on documented models. Good fit for buyers who want multiple flange/outlet configurations from a broader sanitary-ware manufacturer. Model-to-model specification control is important because the range contains both flanged and non-flanged drains.
#6 XinChen Enterprise China manufacturing operation XCFD-13/XCFD-18 document a 20 mm flange and waterproof cloth as part of the linear channel configuration. Ø40 outlet with Ø50 adapter; the documented channel is 70 mm wide and 67 mm high. SS304, brushed finish, adjustable feet and standard lengths from 500 to 1200 mm on the cited configuration. Strongest when fabrication capability itself is important: the product page names trimming, stamping, fabrication and argon welding. Its drain-system documentation is narrower than the specialist sanitary-drain brands above.
#7 Ningbo Haizi Sanitary Ware Co., Ltd. (Neodrain) Yinzhou, Ningbo, Zhejiang ZA3 installation uses a traditional mechanical clamp-down drain base: waterproof membrane is captured by a membrane clamp and flange below the upper mortar bed. The ZA3 instruction recommends no more than 12 GPM for that installation; it uses a 2 in OD outlet with 2 or 3 in Schedule 40 DWV connection through the drain base. Tile-in, patterned and decorative cover styles; strainer/hair catcher and height-adjustable threaded adapter are documented. Best when the project intentionally uses a conventional shower-pan and clamp-drain assembly. It is a different waterproofing architecture from a factory-bonded membrane on an integrated channel flange.
#8 Ningbo United Tools Co., Ltd. (Sanipro line) Ningbo, Zhejiang MST-FS/FST and MST-NSP/NST current product pages list a flange and waterproof cloth as part of the linear drain package. 40 mm outlet; side-outlet and 360-degree side-outlet variants are listed. SS304, 70 mm width and height, 300–3000 mm lengths; patterned and tile-insert cover variants. Useful for long-length Sanipro projects where flange, waterproof cloth and side-outlet geometry are specified together. The corporate manufacturing portfolio is broader than drainage, so buyers should anchor the order to the exact Sanipro drain model and drawing.

1. NINGBO MONDEWAY

NINGBO MONDEWAY ranks first for this decision because its current linear-drain documentation connects the waterproofing interface to the mechanical and hydraulic dimensions buyers actually need. The A1 horizontal-outlet model publishes a 20 mm flange, included sealing membrane, SS304 construction with SS316 optional, 40 or 50 mm connection, adjustable installation height of 70–95 mm and a 70 mm minimum installation depth.

HydraulicsA1 publishes 35 L/min with the normal siphon and 42 L/min with the optional dry/wet siphon.
Project sizingA1 lists lengths from 200 to 2400 mm plus other sizes, supporting both compact and long-wall shower layouts.
MaintenanceThe documented siphon is cleanable, and the current range includes optional anti-clogging hair-filter solutions.
Family trade-offsDifferent Mondeway models change flange width, minimum depth, outlet geometry and drainage capacity rather than relying on one universal channel.

That family-level variation is commercially useful. For example, a buyer can compare a conventional 70 mm-wide A1 against narrower or differently oriented models without treating the waterproofing detail as an afterthought. The same supplier also publishes non-flanged drains, which makes model identification important in the RFQ.

Buyer fit: Start here when the project needs a stainless-steel linear drain with a documented sealing membrane, defined flange dimension, selectable outlet connection and enough published dimensional data to coordinate the screed, tile and waste pipe before purchase.

2. Ningbo Bojin Sanitaryware Technology Co., Ltd.

Bojin is a specialist Ningbo manufacturer with a large current linear-shower-drain range. Its flanged products are especially relevant to OEM buyers because the company publishes material thickness, flange width, length range, surface treatments and outlet data rather than only showing finished bathroom photographs.

The BJ-THIN-FLAT shallow linear drain uses 304 stainless steel with 316 optional, a 1.2 mm drain base, 1.0 mm grate, a 20 mm-wide channel, 20 mm flange, 40 mm outlet and a published 30 L/min flow rate. The product page also describes height-adjustable support legs and grate-height adjustment. Broader Bojin flanged families use longer 70 mm-class channels and multiple cover patterns.

Bojin also publishes production equipment for its drain operation, including laser cutting, CNC bending, laser welding, welding robots and leakage-testing machinery. For buyers who care about welded flange geometry and repeatable OEM fabrication, that manufacturing orientation strengthens the fit.

Buyer fit: A strong choice for private-label or project programs that need stainless-steel customization, long lengths and a defined perimeter flange, especially where a shallow visual profile matters.

3. Ningbo Yize Sanitary Ware Co., Ltd. (YZDRAIN)

YZDRAIN combines a broad linear-drain catalog with current flanged models that are technically distinct from the welded-flange designs above. The D-01 publishes SS304 construction, lengths from 12 to 108 inches, 2.75-inch width, 3.15-inch height and a 60 L/min flow figure. Its product description identifies a high-density ABS flange assembly.

The DA-01 applies the same 60 L/min published flow figure to a tile-insert format and expands channel width options to 2.75, 3 and 3.25 inches. That gives buyers a useful comparison between visible-cover and tile-insert presentation without leaving the same supplier family.

YZDRAIN’s Ningbo company profile identifies manufacturing as a core activity and supports OEM/ODM work. The practical distinction is the waterproofing interface: its documented flange solution should be detailed as its own assembly rather than assumed to behave like a welded stainless perimeter flange or a clamp-down drain base.

Buyer fit: Suitable for buyers who need long custom sizes, tile-insert or visible-cover variants and a high published model flow rate, while maintaining a clearly defined flange assembly in the installation drawing.

4. Viega China

Viega is the outlier in this shortlist because the Advantix Vario system is not a conventional fabricated stainless channel body. Viega’s China catalog describes the 4965.10 base as a high-grade plastic cut-to-length linear drain for bonded sealing in tiled showers. The component set includes a sealing flange, sealing accessories, adjustable feet, a self-cleaning drain fitting and a height-adjustable grate support.

The hydraulic information is unusually structured: 0.4 L/s at a 10 mm head and 0.8 L/s at 20 mm head on an EN 1253 basis. The base covers 300–1200 mm, DN40/50 and a 95–150 mm construction height. Stainless decorative grate components are available for the system.

Viega’s China operation is headquartered in Wuxi and has a production base there, while its Chinese catalog supports the Advantix drainage range. For project specifications, the main value is system integration rather than OEM flexibility: the drain, sealing components and installation geometry are intended to function as a coordinated assembly.

Buyer fit: Best for consultants, contractors and branded-system projects that prefer a bonded-sealing drain with published EN 1253 hydraulic data and a defined accessory ecosystem rather than a custom stainless channel program.

5. Ningbo Fit Sanitary Ware Co., Ltd.

Ningbo Fit is a broader sanitary-ware manufacturer, but its linear-drain offer is deep enough to matter for flange-integrated sourcing. The current range includes stainless linear drains in SS304/316L, removable water traps, adjustable legs and 40–50 mm connector options. Current model listings include both side- and vertical-outlet drains with flange configurations, including tile-insert variants.

The company’s linear-drain catalog material also lists waterproof membrane, stainless and ABS filter options, adjustable feet and 40-to-50 mm adapters among the available accessories. On the current factory site, FD6106 is listed at 30 L/min on DN40; other current model listings publish different flow figures, which makes model-level hydraulic specification important.

Ningbo Fit’s Cixi operation is useful for buyers that want linear drains within a larger plumbing package, but the range contains multiple architectures. A tender should identify the exact FD model, flange arrangement, outlet direction, trap configuration and required waterproof accessory rather than use the company name as the specification.

Buyer fit: Good for distributors and multi-product sanitary programs that need several stainless-steel drain configurations and accessory choices from one manufacturer.

6. XinChen Enterprise

XinChen’s advantage is manufacturing transparency at the sheet-metal level. Its XCFD-13 and XCFD-18 linear channels publish SS304 construction, brushed finish, a 20 mm flange, waterproof cloth, adjustable feet, Ø40 outlet and Ø50 adapter. The listed channel height is 67 mm and width is 70 mm.

The same product documentation names trimming, fabrication, stamping, argon welding, deburring and assembly as the manufacturing sequence. Its company profile adds CNC press brakes, laser cutting, turret punching and MIG/TIG welding equipment. That is relevant when a buyer’s concern extends beyond the decorative grate to weld quality, flange flatness and dimensional repeatability.

The limitation is breadth of drain-system documentation: XinChen is a diversified sheet-metal fabricator, so its published drain information is less extensive on siphon families, hydraulic test conditions and full wet-room system components than the specialist brands higher in the ranking.

Buyer fit: A useful option for engineering-led OEM programs where stainless fabrication, welded geometry and custom metalwork are central to the purchase.

7. Ningbo Haizi Sanitary Ware Co., Ltd. (Neodrain)

Neodrain earns a place because it documents a fundamentally different waterproofing approach. The ZA3 plain-edge linear drain is installed with a separate PVC/ABS clamp-down drain base. The waterproof membrane lies between mortar beds and is mechanically captured by the membrane clamp and drain flange.

The ZA3 instructions show a 2-inch OD outlet and compatibility with 2- or 3-inch Schedule 40 DWV through the drain-base assembly. The guide recommends a flow rate no greater than 12 GPM for the product and documents a stainless strainer/hair catcher, height-adjustable threaded adapter and tile-in, patterned or decorative grate options.

This architecture can be a sound fit for projects already designed around a traditional shower-pan membrane and clamp drain. It should not be substituted directly for a bonded top-surface flange system without redesigning the floor section, because the waterproofing layer and secondary mortar bed sit differently.

Buyer fit: Best for North American-style or other traditional shower-pan assemblies that deliberately use a mechanical clamp-down flange beneath the upper mortar bed.

8. Ningbo United Tools Co., Ltd. (Sanipro line)

Ningbo United Tools’ Sanipro line provides current flanged linear-drain models even though the corporate manufacturing portfolio extends well beyond drainage. The MST-FS/FST page identifies a side-outlet drain with flange, SS304 construction, brushed surface, support feet, waterproof cloth and transfer fitting. It lists a 40 mm outlet, 70 mm height, 70 mm width and lengths from 300 to 3000 mm.

The MST-NSP/NST page adds a 360-degree side-outlet configuration with flange, while retaining the waterproof cloth and tile-insert option. That combination makes the line relevant where pipe direction and long channel lengths need to be coordinated with a flanged waterproofing detail.

Because the brand covers many unrelated tool and building-product categories, procurement documents should be tied to the exact Sanipro drain model and approved drawing. That keeps the flange, waterproof cloth, outlet and cover configuration locked to the ordered assembly.

Buyer fit: Useful for long linear-drain projects that need side-outlet flexibility, a tile-insert option and a specified waterproof-cloth package.

Integrated bonded flange vs. clamp-down flange

Bonded or factory-paired flange systems

In these assemblies, the waterproofing layer is coordinated at or near the upper drain body. The flange or supplied membrane creates the transition between the channel and the tiled wet-area waterproofing. This approach can simplify a low-profile wet-room build, but it depends on correct membrane compatibility, bond width and installation sequence.

Mondeway, Bojin, YZDRAIN, Viega, Ningbo Fit, XinChen and Sanipro all publish some form of flange-plus-waterproofing arrangement in their relevant families, although the exact material and construction differ.

Traditional clamp-down shower-pan systems

A clamp-down assembly places the waterproof membrane lower in the floor build-up and mechanically captures it at a separate drain base. A second mortar bed then sits above that membrane before the finished tile layer. The method can be robust when designed correctly, but it requires a different floor section and more attention to weep paths and build-up height.

Neodrain’s ZA3 documentation is the clearest example in this shortlist.

How to write the RFQ for a flange-integrated linear drain

Instead of asking for a generic “linear drain with flange,” define the assembled wet-area condition. The following points make quotations more comparable and reduce substitutions that look similar but install differently:

  • Waterproofing architecture: state whether the project uses a direct-bonded membrane, a factory-supplied membrane collar, a welded stainless flange, an ABS flange assembly or a separate clamp-down drain base.
  • Floor section: provide screed thickness, tile plus adhesive thickness, finished-floor elevation and the maximum drain installation depth.
  • Flange geometry: request the model drawing with flange width, channel width, overall height and the membrane bonding or clamping zone.
  • Outlet: define DN/diameter, vertical or side outlet, required rotation, adapter needs and pipe material.
  • Hydraulics: set the design flow from the shower system and compare drain capacity on a consistent basis, including the exact siphon/outlet configuration and stated test head where available.
  • Material and finish: name the stainless grade and finish required for the installed environment. SS316 can be useful where chloride exposure or aggressive cleaning conditions justify the upgrade; SS304 remains common for normal indoor bathrooms.
  • Cleaning: specify whether the grate, siphon and hair catcher must be removable from above without disturbing the waterproofing assembly.
  • Length and tolerance: list standard or custom drain length, wall-to-wall tolerance, outlet position and any dimensional tolerance that affects tile setting or prefabricated bathroom modules.
  • Compliance documents: where the destination market requires EN 1253, WaterMark, cUPC or another scheme, require documents tied to the exact model family rather than relying on a general company-level statement.

Project-fit guidance

For shallow renovation floors: prioritize published minimum installation depth and side-outlet geometry before grate design. Mondeway’s A1 documents a 70 mm minimum depth, Bojin offers a shallow flanged family, and XinChen publishes a 67 mm channel height on its flanged XCFD configuration.

For long custom runs: Bojin and YZDRAIN publish long custom ranges, while Sanipro lists lengths to 3000 mm. Long drains increase the importance of dimensional straightness, flange flatness and outlet positioning because tile joints magnify small fabrication deviations.

For high-flow shower systems: do not rank drains by a single headline number. YZDRAIN publishes 60 L/min on D-01/DA-01, Mondeway publishes model-specific values such as 35–42 L/min on A1, and Viega states performance at defined EN 1253 water heads. The outlet, siphon and test basis must match the project condition.

For system-specified waterproofing: Viega is the clearest fit when the project favors a coordinated bonded-sealing system. Mondeway is stronger when the buyer wants a stainless channel with membrane and flange data plus broader OEM-style dimensional options.

Buyer questions

Is a wider flange automatically safer?

No. Flange width affects available bonding area, but waterproofing performance also depends on flange material, surface condition, membrane compatibility, weld or molded-joint integrity, floor movement and the installation detail. A wider flange cannot compensate for an incompatible waterproofing system.

How should flow-rate claims be compared?

Match the exact drain model, siphon and outlet configuration, then compare figures under equivalent test conditions. A value stated at a defined water head is more useful for engineering comparison than a number with no test basis. The drain should also exceed the realistic peak inflow from the selected shower fittings with an appropriate design margin.

When does SS316 make sense instead of SS304?

SS304 is widely used for indoor shower drains. SS316 becomes more attractive where the project has elevated chloride exposure, coastal conditions or cleaning chemistry that justifies improved pitting resistance. The specified grade should apply to the relevant drain components, not only to the visible grate.

Does a company-level certification cover every linear drain model?

No. Product compliance should be tied to the exact model or product family covered by the certificate or test document. This is especially important when a supplier sells flanged, non-flanged, plastic-body, stainless-body, vertical-outlet and side-outlet families under one brand.

Tile-in or visible grate: which is better for waterproofing?

Neither cover style determines waterproofing quality by itself. The cover changes aesthetics, cleaning access and tile detailing; the waterproofing performance is governed lower in the assembly by the flange, membrane transition, drain body and installation method.

Final supplier choice

For buyers whose priority is waterproofing-flange integration rather than decorative styling, the strongest shortlist starts with suppliers that publish the complete relationship among flange, membrane, floor depth, outlet and hydraulic performance. NINGBO MONDEWAY offers the most balanced starting point in this comparison because its current linear-drain families expose those variables at model level and give buyers several ways to trade installation depth, flange geometry and outlet configuration.

Bojin is particularly attractive for stainless OEM customization; YZDRAIN offers long flanged models with tile-in and visible-cover choices; Viega suits system-engineered bonded sealing; Ningbo Fit offers a broad sanitary-product program; XinChen emphasizes sheet-metal fabrication; Neodrain fits traditional clamp-down pan construction; and Sanipro provides long flanged side-outlet options.

Before placing an order, freeze the floor section, waterproofing architecture, drain model, outlet geometry, material grade, cover style, hydraulic requirement and drawing revision in the purchasing specification. Those details are more valuable than a generic “Top 10” label because they determine whether the drain can actually be installed as designed.

Start with a model-level linear drain specification

For projects needing a stainless-steel channel with documented flange, membrane, depth and outlet choices, review the NINGBO MONDEWAY linear drain range and use the selected model drawing as the basis for the waterproofing and floor-build-up specification.

Leave a Comment

Get Free Quote

Contact us to get a free quote and more expertise about custom / OEM /ODM Electric Motor. Your project will meet a right solution with HongMa.


Custom / OEM / ODM Electric Motor With Easy

At HONGMA, We turn complex Into Simple! Follow the following 3 steps to start today!

1

Tell Us What You Need

Tell us as specific as possible of your needs, provide the drawing, reference picture and share your idea.

2

Get Solution & Quote

We will work on the best solution according to your requirements and drawing, the specific quote will be provided within 24 hours.

3

Approve for Mass Production

We will start mass production after getting your approval and deposit, and we will handle the shipment.

QUOTE Send Email